系统主要优势:
- 可以测试150W以内任何单组输出电源、充电器
- 统计测试报告（Excel电子档）
- 图形界面基于Windows XP环境
- 自动生成CPK、数据分布图等品质报表
- 测试程序编辑功能
- 配置灵活
- 性价比高，适合大中小企业
- 测试速度快
- 测试不良结果实时打印功能
ATC1100-S系统配置:
- 自动测试控制软件
- ATC100主机一台。（每台主机内置功率测试模块/交流/直流/纹波噪音测试模块/电子负载/AC与DC源/浪涌测试模块)
- 单机测试架
系统测试项目：
- 启动测试(Start-up)
- 欠压测试(UVLO)
- 待机测试(Idle)
- 恒压区测试(Standard CV)
- 恒流区测试(Standard CC)
- 短路测试(Short Circuit)
- 过压测试(Over Voltage)
- 过流测试(Over Current)
- 线调整(Line Regulation)
- 负载调整(Load Regulation)
- 平均效率（Average Efficiency)
- I-V曲线(I-V curve)
- 关机测试(Power Down)
- 支持性测试(Support Function)
自动测试控制软件：
- 友好的用户界面
- 测试程序易编辑
- 测试速度快
- 测试报告与数据管理功能
系统技术参数：
|
Test Name |
Parameters Tested and Range |
Accuracy |
|
START UP |
Inrush current: 0 – 83A Startup time: 0 to 65 sec. Output voltage overshoot: 0 – 60V |
±2% (reading + range) ±1ms ±1% (reading + range) |
|
UVLO |
Functional test only, Pass/Fail |
N/A |
|
IDLE |
Standby input power: 0 – 100W Standby input current: 0 – 10A Input voltage: 30 – 280V |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
|
STANDARD CV (constant current and constant resistance load) |
CC Mode: 0 – 15A CR Mode: 0.1 – 50Ohm Input voltage: 30 – 280V Input Current: 0 – 10A Input Power: 0 – 200 W Power Factor 0 – 1.0 Output Voltage 0 – 60V Output Current 0 – 15A Efficiency: 0 – 100% Ripple/Noise 200kHz: 0 – 500mV Ripple/Noise 20MHz: 0 – 500mV |
±0.2% (reading + range) ±0.4% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) ±2% (reading + 5mV) ±2% (reading + 5mV) |
|
STANDARD CC
(constant voltage and constant resistance load) |
CV Mode: 0 – 60V CR Mode: 0.1 – 50Ohm Input voltage: 30 – 280V Input Current: 0 – 10A Input Power: 0 – 200 W Power Factor 0 – 1.0 Output Voltage 0 – 60V Output Current 0 – 15A Efficiency: 0 – 100% |
±0.1% (reading + range) ±0.3% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) |
|
SHORT CIRCUIT
|
Input voltage: 30 – 280V Input Current: 0 – 10A Input Power: 0 – 200 W Power Factor 0 – 1.0 Output Average Current: 0 – 15A |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.2% (reading + range)* *For steady current |
|
OVER CURRENT
|
Current trip point: 0 – 15A Trip point voltage: 0 – 60V |
±1% (reading + range)+(step size) ±1% (reading + range) |
|
OVER VOLTAGE |
OV trip point: 0 – 60V |
±1% (reading + range) |
|
LINE REGULATION |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
|
LOAD REGULATION |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
|
POWER DOWN |
Holdup time: 0 – 65 sec. Input voltage: 0 – 280V Output current: 0 – 15A Output voltage overshoot: 0 – 60V |
±1ms ±0.1% (reading + range) ±0.1% (reading + range) ±1% (reading + range) |
|
Global Setting |
Load On Voltage: 0 – 60V Wait Time: 0 – 32767 sec. Nominal Output Voltage: 0-60V Nominal Output Current: 0-15A |
±1% (reading + range) ±1ms ±1% (reading + range) |
|
Optional Setting |
Bias Output Voltage : 0 – 28V Relay State rated current: 5A |
±1% (reading + range) - |
概述:
- 输入电压：220Vac ±10%
- 总体重量：39Kg
- 尺寸：500x450x133mm
应用特性：
- 该测试系统精度高，适用于生产线的自动化测试，双机测试，效率高。主要适测单组输出的中小功率的电源适配器、充电器产品的测试。
- 同时配备有使用方便的双机测试架，该测试架采用左右转换模式测试，大大减少了操作员的等待时间，有效的提高了生产测试效率，同时，该测试架配有人工判断开关，比如外观及LED灯的判断，当发现此类不良时，同样可产生不良记录。
- 系统基于WINDOWS XP使用环境，测试结果可迅速成电子表格，同时自动产生<<生产报表>>与CPK值及品质报表，为研发及品质人员提供了快与准的测试数据！
订购信息：
- ATC1100-DRX: ATC100主机二台、工业电脑一套、显示器一台、1000VA变频电源一台、双机测试架一台、19” 标准机柜一台、热敏打印机一台。
- ATC1100-DR: ATC100主机二台、工业电脑一套、显示器一台、双机测试架一台、19”标准机柜一台、热敏打印机一台。
- ATC1100-DX: ATC100主机二台、双机测试架一台、1000VA变频电源一台.
- ATC1100-D: ATC100主机二台、双机测试架一台。
- ATC1100-SX: ATC100主机一台、1000VA变频电源一台、单机测试架一台。
- ATC1100-S: ATC100主机一台，单机测试架一台。
